Canon Pixma IP1980 wireless printer driver setup

Canon Pixma IP1980

Canon Pixma iP1980 wireless printer driver setup. A printer of old were able to deliver cost savings as it has durability cartridges are long and can create quality prints photo beautiful up to A4 size with print speeds in color mode can be achieved up to 17 ppm and if using print modes black and white reaches a maximum at 21 ppm.

Software printer Driver Canon Pixma Ip1980 is actually able to use the printer driver Canon Ip1900, but I would still give the download link driver printer Canon Pixma iP1980 free for you.

Canon Pixma IP1980 Wireless Connection

Before Starting Wireless Connection Setup
Make sure that the printer is turned on.
If the power is on, the ON lamp will be lit.
If the Wireless lamp on the printer is flashing, press the Stop button.

Canon Pixma IP1980 Easy wireless connect

Press & hold the Wireless button & the Wireless lamp flashes
Press the Color button
Press the Wireless button repeatedly until the Network lamp lights up
Press the Color button.
Make sure the Wireless lamp flashes.
Return to the application screen & proceed with the setup.

Canon Pixma IP1980 WPS Connection

Make sure the button on the wireless router is ready to be pressed.
Press & hold the Wireless button & the Wireless lamp flashes.
Press the Color button.
Press the Wireless button repeatedly until the Direct lamp lights up.
Press the Color button, and make sure that the ON lamp & the Wireless lamp flash, then press & hold the button on the wireless router within 2 minutes.
Make sure the Wireless lamp is lit.
The network connection setup is now complete.

Canon Pixma IP1980 Using WPS (PIN Code) Connection

Press & hold the Wireless button on the printer until the Wireless lamp flashes.
Press the Color button
Press the Wireless button repeatedly until the Network lamp and the Direct lamp light up.
Press the Color button.
Press & hold the Stop button on the printer until the Alarm lamp flashes 16 times, and then release the Stop button after the sixteenth flash.
Follow the on-screen instructions on the device (such as a smartphone) to set the WPS PIN CODE described on the printed Network Configuration Page to the wireless router.
Make sure the Wireless lamp on the printer is lit.

Canon Pixma IP1980 Troubleshooting -WPS-

1. The Network Lamp & the Direct Lamp Light Up

Press the button on only one wireless router.
Check the wireless router security settings.

2. The Network Lamp Lights Up

Is the router or other network device turned on? If it is already turned on, turn it off, and then turn it back on.
After checking the following points, wait a while and configure wireless connection settings again.

The printer support Operating System (OS):

Windows Vista
Windows XP
Windows 7
Windows 8
Windows 8.1
Linux
Mac OS

Canon Pixma IP1980 wireless printer driver setup